Default credentials for HP LaserJet P1505n printer web interface?

I have a P1505n at work that I need to reconfigure via the printer's web interface. Unfortunately, the manual does not include the default credentials to log in to the crazy thing. I might have set them to something else, but if I did I don't remember what I used.





Does anyone know the default username and password for the printer? If not, how do I reset the thing to factory defaults?Default credentials for HP LaserJet P1505n printer web interface?
There is no default Username or Password for accessing the printer thru the network. Unless you set one yourself, all you should need to do is open an internet browser (i.e. Internet Explorer) and type in the printer's IP address or Host Name in the address bar. That should take you into the printer to set it up as you need. If you don't know either one, then you'll need to print out a printer configuration page (usually by pressing and holding the Go button for 5 to 6 seconds {usually a status light will change} while the device Ready light is on and no other jobs are printing.)





If it is locked up, then you'll need to do a cold reset to reset all the printer and network interface parameters:


To perform a cold reset:


1. Turn the printer off.


2. Press and hold down the GO button.


3. Turn the printer on, and continue to hold the GO button for at least 5 seconds, but not longer than 15 seconds. During this process, the Attention LED turns on.


4. Release the GO button.





Hope that helps. Best of luck.Default credentials for HP LaserJet P1505n printer web interface?
1) Hold down both buttons at the same time


2) Keep both buttons pressed down and then turn off the power and unplug the power cord from the back.


3) Keep the buttons depressed at all times during this procedure.


4) Plug in the power and turn on the printer, wait about 6secs and then release buttons Report Abuse

I am a beginner but this might help


http://www.papercut.com/kb/Main/Resettin鈥?/a>